Professional digital fridge and freezer thermometer - ABS

Professional digital fridge/freezer thermometer made of ABS. Features two temperature sensors for precision measurement and a high resolution screen. Instructions: Insert the battery in the battery case; After approx. 3 seconds, the thermometer will show a temperature reading; Use the double-sided mounting tape provided to attach the probe holder inside the refrigerator/freezer; Use magnets or the adhesive velcro provided to attach the thermometer on the outside of the refrigerator/freezer; select the preferred temperature scale (Celsius or Fahrenheit) by pressing the button °C/°F. To measure room temperature or the refrigerator/freezer temperature press ROOM/FRIDGE. To display maximum and minimum temperature: Press MAX–MIN to show the maximum temperature measured, then press the button again to show the minimum temperature measured. Press again to return to the standard screen setting. To erase the temperatures held in the thermometer’s memory, press the button MAX–MIN for approx. 2 seconds. Setting the alarm: press the bell button for approx. 2 seconds until the words HIGH and FRIDGE start flashing. Press the arrow button to set the maximum temperature limit. Repeat the steps to set a minimum temperature limit. Press the bell button again to complete the procedure. Pressing the arrow button when setting the alarm will automatically raise the temperature value. If the sensor inside the refrigerator/freezer detects a temperature outside the range set, the thermometer will sound an alarm. Press the bell button to switch the alarm on or off. Cautions: Do not place the thermometer inside the refrigerator/freezer. Close the refrigerator/freezer door carefully to avoid damaging the probe cable. The thermometer is not dishwasher safe. The thermometer is not waterproof. Clean with a damp cloth.